Vaporesso Armour Ultra Vape Mod Kit 100W with iTank T Tank – £33.59

£33.59 £44.99 GET THIS DEAL
VAUK
days
0
0
hours
0
0
minutes
0
0
seconds
0
0

SaveSavedRemoved 0

🔋 Vaporesso Armour Ultra Vape Mod Kit 100W + iTank 2 – Built Tough, Vapes Smart | Only £33.59 🛡️💨

Ready to dominate your vape game with durability, power and flavour? Meet the Vaporesso Armour Ultra Vape Mod Kit – now bundled with the acclaimed iTank 2 sub-ohm tank. This is not your average starter kit. It’s a performance-driven beast, engineered for cloud chasersflavour fiends, and vapers who demand resilience.

With up to 100W output, dual battery support, Vaporesso’s AXON chip, and the mesh-powered iTank 2, this kit blends power, sophistication, and rugged build in one phenomenal vape experience.

🔥 Whether you’re climbing a mountain or chilling on the sofa — this is your vape, redefined.


🚀 Key Features at a Glance

✔️ 100W Output Box Mod ✔️ Dual 21700 or 18650 Compatibility (Adaptors Included) ✔️ 0.96″ TFT Colour Display ✔️ Shockproof & Scratch-Resistant TPU Armour ✔️ iTank 2 Sub-Ohm Tank (8ml capacity) ✔️ GTi Coil Compatibility ✔️ Advanced AXON Chip with Multiple Modes ✔️ USB-C Fast Charging (2A)

🔗 Looking for just the mod? Check the Vaporesso Armour Ultra Box Mod Only →


🧱 Built Like a Tank – For the Tank Inside

Wrapped in an industrial-grade TPU rubber coating, the Armour Ultra mod lives up to its name:

  • 🛡️ Shockproof & impact resistant
  • 🔥 Heat-safe even under high wattage use
  • 🧊 Scratch-resistant and daily wear-proof
  • 💪 Built for harsh environments — vapes through it all

Perfect for tradespeople, adventurers, or everyday vapers who value gear that lasts.


🔬 AXON Chip Power – Fast. Accurate. Safe.

The AXON Chip makes every puff smarter:

  • ⚡ Instant Firing
  • 🎮 Multiple Modes:
    • Pulse Mode – Maintains consistent wattage
    • F(t) Mode – Enhances flavour with timed curve
    • DIY Mode – Full control for wattage/temp curves
    • ECO Mode – Saves battery without loss of output
  • 🔒 Full protection suite: overcharge, overheat, short circuit

This is pro-level technology made user-friendly — beginner safe, veteran approved.


🔋 Battery Options – Power How You Like

Use either:

  • 🔸 2x 21700 Batteries (for insane life 🔋🔋)
  • 🔸 2x 18650 Batteries (adaptors included)

💡 Batteries not included – get the most from Vape Accessories section.

Recharge via USB-C when needed, but external charging is always best.


💨 The iTank 2 – Smooth, Flavourful, Leak-Resistant

The included Vaporesso iTank 2 tank is one of the most flavour-rich and leak-resistant sub-ohm tanks available.

  • 🍃 Turbo Airflow System for smooth draws
  • 💧 Top Fill Slide-to-Open Design
  • 🧲 GTi Mesh Coils – Massive vapour and taste
  • ✅ Compatible with 0.2Ω and 0.4Ω GTi Mesh coils
  • 🔁 Leak-reducing self-circulation design

💯 Built to match the power of the mod — the iTank 2 maximises every watt.


📦 What’s in the Kit?

  • 🧊 1x Vaporesso Armour Ultra 100W Mod
  • 🌪️ 1x Vaporesso iTank 2 (8ml capacity)
  • 🔩 1x GTi 0.2Ω Mesh Coil (Preinstalled)
  • 🧪 1x GTi 0.4Ω Mesh Coil (Spare)
  • 🔄 2x 18650 battery sleeves
  • 📘 1x User Manual
  • 🔌 1x USB-C Cable

📐 Specs Snapshot

Attribute Details
⚙️ Output 5W–100W
🔋 Battery Dual 21700 / 18650 (with sleeves)
📺 Screen 0.96” Colour TFT
🧠 Chipset AXON
🔌 Charging USB-C 5V/2A
🌬️ Tank Capacity 8ml
🧪 Coil Support GTi Mesh (0.2Ω, 0.4Ω)
🧱 Body Material TPU + Zinc Alloy
⚠️ Safety Full suite: overheat, overcharge, short-circuit
🌡️ Temp Control 100–315°C (in TC mode)
🔁 Firmware Upgradeable
✅ TPD Compliant Yes (mod + tank sold separately from e-liquid)


❓ Q&A – Vaporesso Armour Ultra Mod Kit

What batteries does this kit take?

  • 2x 21700 (recommended) or 2x 18650 with sleeves included.

Are the batteries included?

  • No. You’ll need to buy them separately.

What coils work with the iTank 2?

  • All GTi Mesh Coils — including 0.2Ω and 0.4Ω for sub-ohm vaping.

Can I use other tanks with this mod?

  • Yes – it supports any 510-threaded tank with 0.1–3.0Ω resistance.

Is it good for beginners?

  • Yes, with Smart Mode and Pulse Mode – but more suited for intermediate vapers due to advanced features.

How do I fill the iTank 2?

  • Slide the top cap to reveal the fill port. No mess.

How do I know when to replace the coil?

  • When flavour drops or vapour decreases. Typically after 7–10 days of regular use.

Is the mod waterproof?

  • No, but it’s highly resistant to scratches, heat, and impact.

What’s the difference between F(t) Mode and Pulse Mode?

  • F(t) optimises temperature curves for flavour. Pulse fires every 0.02 seconds for smoother clouds.

Can I use nicotine salt e-liquids?

  • Not recommended — this is a sub-ohm kit made for high-VG, freebase liquids.

Is it legal and compliant in the UK?

  • Yes. The kit is TPD compliant and safe to use.

🧠 Final Verdict – Should You Buy the Armour Ultra Kit?

If you’re looking for:

  • 🔋 Extreme power with flexibility
  • 💨 Thick clouds + accurate flavour
  • 🛡️ Tough-as-nails design
  • 🔄 Top-class coil performance
  • 💸 Excellent value at £33.59

…then the Vaporesso Armour Ultra Kit is an absolute win. It’s built to endure and engineered to impress.

✅ Perfect for experienced vapers ✅ Reliable enough for pros ✅ Accessible enough for casuals

👉 Buy the Armour Ultra Kit now and level up your vaping → 🔗 https://vapebargains.co.uk/vaporesso-armour-ultra-vape-mod-kit-100w-with-itank-t-tank-33-59/


🔍 Attribute 📋 Value
🏷️ Product Name Vaporesso Armour Ultra Vape Mod Kit 100W with iTank 2
⚡ Max Power Output 100W
🔋 Battery Compatibility Dual 21700 or Dual 18650 (with adaptors included)
🔌 Charging Port USB Type-C (DC 5V/2A Fast Charging)
🧠 Chipset Vaporesso AXON Chip
🎮 Output Modes Pulse Mode, F(t) Mode, ECO Mode, DIY Mode, Smart TC
🖥️ Display Screen 0.96” TFT Colour Display
📦 Included in the Box – 1x Vaporesso Armour Ultra Mod
– 1x iTank 2 Sub-Ohm Tank (8ml)
– 1x GTi 0.2Ω Mesh Coil (Preinstalled)
– 1x GTi 0.4Ω Mesh Coil (Spare)
– 2x 18650 Battery Adaptors
– 1x USB-C Charging Cable
– 1x User Manual
💧 Tank E-liquid Capacity 8ml (Bubble Glass)
🔁 Tank Refill Method Slide-to-Open Top Fill
🌬️ Airflow Control Turbo Adjustable Bottom Airflow
🧪 Coil Compatibility GTi Mesh Coils – 0.2Ω / 0.4Ω Supported
🔩 Threading Type 510 Standard
🧱 Chassis Material Zinc Alloy Frame + TPU Shock-Resistant Coating
📏 Dimensions Approx. 96mm x 52mm x 30mm
🌡️ Temp Control Range 100°C–315°C (200°F–600°F)
📊 Resistance Range 0.1Ω – 3.0Ω
🛡️ Safety Features Short-Circuit, Overheat, Overcharge, Low Voltage Protection
🔄 Firmware Upgradeable Yes – via USB Connection
🪫 Pass-Through Charging Supported (Vape While Charging)
📆 Release Date 2024
🧾 TPD Compliant Yes – Tank capacity and hardware certified
💷 RRP £33.59 (Vape Bargains UK)
🔗 Product Page View Product
Vaporesso Armour Ultra Vape Mod Kit 100W with iTank T Tank – £33.59
Vaporesso Armour Ultra Vape Mod Kit 100W with iTank T Tank – £33.59
£33.59 £44.99
Vape Bargains UK
Logo
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.