Voopoo Vinci Spark220 Box Mod – 220W – £24.99
⚡ Twin-Battery Beast Meets Futuristic Control 🔥
🧠 Powered by Gene.TT Chipset | 🪶 Lightweight Build | 💨 Up to 220W of Pure Power
🚀 Introduction: What Happens When VooPoo Turns Up the Power Dial?
If you’re looking to step into the next level of vaping performance, it’s time to meet the Voopoo Vinci Spark220 Box Mod. Don’t let the name fool you — this isn’t a pod mod or compact AIO. This is a dual-18650 battery box mod, purpose-built for power-hungry sub-ohm tanks, high-wattage vaping, and smart chipset control.
💡 Think: Drag 4-level performance with Vinci-style ergonomics and futuristic flair. This device offers full 220W output, advanced safety protocols, multiple modes (SMART, RBA, TC), and USB-C fast charging — all in a lightweight zinc alloy chassis that feels like a gadget from tomorrow.
Whether you’re rocking a TFV18, Zeus Tank, or the UFORCE-L, the Vinci Spark220 provides the precision, battery endurance, and firepower you need to vape at your absolute best.
📦 What’s in the Box?
- ✅ 1x Voopoo Vinci Spark220 Mod (220W Max Output)
- ✅ 1x USB Type-C Charging Cable
- ✅ 1x User Manual
- ✅ 1x Warranty Card
- ✅ Batteries not included (requires 2x 18650)
🔥 Key Features & Benefits
🔋 Dual 18650 Batteries (Sold Separately)
Pop in two high-drain 18650 cells and experience all-day vaping even at high wattages.
🧠 Smart GENE.TT 2.0 Chipset
One of the smartest chips in vaping. Features Smart Mode, RBA Mode, Turbo Mode, and Temperature Control. Automatically detects coil resistance to prevent burning.
💨 220W Max Power Output
Whether you’re running mesh sub-ohm tanks or heavy RDA builds, the Vinci Spark220 has headroom for cloud-chasing and coil-specific fine-tuning.
🖥️ 0.96” TFT Colour Display
Displays battery level, resistance, puff counter, mode selection, and wattage. Clean UI, high brightness, and stylish design.
⚙️ Multiple Vape Modes
- SMART Mode – Auto coil recognition with wattage safety cap
- RBA Mode – Full wattage control for rebuildable users
- TC Mode – Temperature control for SS/NI/TI wires
- Turbo Mode – Rapid ramp-up for aggressive vape hits
🌬️ Rapid Fire Technology
Firing response time under 0.001 seconds for instant vapour production the moment you press fire.
⚠️ 7-Layer Safety Protection
Built-in circuit protection includes:
- Overheat Protection
- Short Circuit Protection
- Overcharge Protection
- Over-discharge Protection
- Reverse Polarity Protection
- Battery Balance Monitoring
- Timeout Cut-off
🧱 Build Quality & Design
- 🔩 Material: High-quality zinc alloy + brushed aluminium side panels
- 🪶 Weight: Surprisingly lightweight for a dual-battery mod
- 🖼️ Form Factor: Compact and ergonomic — fits beautifully in the hand
- 🎨 Aesthetic: Vinci-style modernity meets power-mod construction
The Spark220 has a futuristic, minimal design that makes it feel less like a “mod” and more like a high-end gadget. It looks incredible paired with a matte black tank or stainless steel RTA.
🛠️ Device Specifications
| Specification | Details |
|---|---|
| Output Wattage | 5W – 220W |
| Output Voltage | 0.5V – 8.4V |
| Resistance Range | 0.05Ω – 3.0Ω |
| Charging | USB-C, 5V/2A Fast Charging |
| Chipset | GENE.TT 2.0 |
| Batteries | 2x 18650 (Not Included) |
| Display | 0.96″ TFT Colour Screen |
| Materials | Zinc-Alloy Chassis |
| Weight | Approx. 120–150g (Without Batteries) |
🌟 Ideal For…
- 🔋 Advanced Users: who want full control over wattage, temperature, and mode.
- 🌪️ Cloud Chasers: looking to pair with high-wattage tanks and RDAs.
- 🧠 Smart Tech Lovers: who appreciate intelligent chipsets and customisation.
- 🔁 Former Drag Mod Users: wanting a lighter, more compact alternative.
⚠️ Battery Guidance & Safety
Important Notes:
- Always use matched 18650 batteries with same charge level and cycle history
- Use battery wraps without tears or damage
- Charge externally where possible
- Never leave charging unattended
👉 Browse Vape Batteries & Chargers Here
🔗 Useful Links
- 🔗 Best Sub-Ohm Vape Tanks for 100W+ Mods
- 🔗 UFORCE-L & PnP-Compatible Tanks
- 🔗 Premium Vape Batteries (18650)
- 🔗 Rebuildable Atomisers – RTA & RDA
- 🔗 High-VG E-Liquids (70/30)
- 🔗 VooPoo Mods & Kits
- 🔗 Vape Bargains – All Offers
❓ Q\&A: Voopoo Vinci Spark220 Box Mod
Is the Vinci Spark220 compatible with other tanks?
- Yes, it features a standard 510 connector and supports any sub-ohm tank or RDA with coil resistance above 0.05Ω.
Does it come with batteries?
- No. You’ll need to buy two high-drain 18650 batteries separately.
Is this a good upgrade from pod systems?
- Absolutely. It’s ideal for vapers moving up from disposables or pods who want longer battery life and more vapour.
What’s Turbo Mode used for?
- Turbo Mode provides extra-fast ramp-up and maximum power delivery, ideal for intense, dense cloud hits.
Can I use temperature control coils?
- Yes, the mod supports SS, Ni, and Ti wire types in TC mode.
Is this mod heavy?
- Surprisingly, no. Even with batteries, it’s lighter than most 220W mods, thanks to its zinc alloy frame.
Is there a lock mode?
- Yes, you can lock the wattage buttons or fully lock the device using the button combination shown in the manual.
Does it have reverse polarity protection?
- ✅ Yes — it’s protected against installing batteries the wrong way round.
What’s the difference between Smart and RBA mode?
- Smart mode auto-adjusts wattage based on the coil installed. RBA mode gives manual control over wattage output.
How fast does it charge?
- With USB-C 2A fast charging, you’ll get a full top-up in under 2 hours, but external charging is still recommended for battery longevity.
| ⚙️ Attribute | 📦 Value |
|---|---|
| 📛 Product Name | Voopoo Vinci Spark220 Box Mod |
| 💰 Price | £24.99 |
| ⚡ Power Output | 5W – 220W (Adjustable) |
| 🔋 Battery Type | Dual 18650 (Not Included) |
| 🔌 Charging Type | USB Type-C (5V/2A Fast Charging) |
| 🧠 Chipset | GENE.TT 2.0 Smart Chip |
| 🖥️ Screen Type | 0.96″ TFT Colour Display |
| 📐 Resistance Range | 0.05Ω – 3.0Ω |
| 🔄 Output Voltage | 0.5V – 8.4V |
| 🎮 Vape Modes | SMART Mode RBA Mode TC Mode (SS, Ni, Ti) TURBO Mode |
| ⚙️ Connection Type | Standard 510 Thread |
| 📎 Compatibility | All 510 Sub-Ohm Tanks, RDAs, RTAs |
| 🧱 Build Materials | Zinc Alloy + Brushed Aluminium Panels |
| 🪶 Weight | Approx. 120–150g (Without Batteries) |
| 📦 What’s Included | 1x Voopoo Vinci Spark220 Mod 1x USB Type-C Cable 1x User Manual 1x Warranty Card |
| 🔐 Safety Features | Overheat Protection Short-Circuit Protection Overcharge Protection Over-discharge Protection Timeout Cut-Off Reverse Polarity Protection |
| 📊 User Level | Intermediate to Advanced Vapers |
| 💡 Ideal Tanks | UFORCE-L TFV18 Z Sub-Ohm Falcon King Any High-Wattage 510 Tank |
| 🧴 Best E-Liquid Type | High VG (70/30 or 80/20) |
| ♻️ Eco Considerations | Reusable Mod – Lower Waste vs Disposables |
| 📜 Compliance | CE Certified, RoHS Compliant |
| 🔗 Category | Vape Mods & Box Kits |
