WISMEC Reuleaux RX300 TC Box Mod 300W Carbon Fibre
WISMEC Reuleaux RX300 Mod is the modular evolution of the RX200 and RX200S. Heralding in the new generation of RX devices, it is the first Wismec platform to utilise a four high amperage 18650 battery configuration, providing unprecedented battery life and a whopping 300W of true maximum power. With an atomiser resistance range of 0.1 to 3.5 ohms and a 50A maximum output current rating, the RX300 is capable of easily handling practically any atomiser requirement needed. Full temperature control capability is also on board, with Ni200 Nickel, Titanium, Stainless Steel and TCR modes available with a range of 200 to 600℉. In temperature control mode, it features an adjustable TCR mode that allows for expanded compatibility and output tuning. At last, the 0.96″ intuitive OLED screen displays a classic and effective organisation, with essential information neatly shown along with separate battery bars evaluation. 2 colours to choose from.
Thread Type: 510 spring loaded thread
Cell type: High-rate 18650 cell
Cell type: (discharge current should be above 25A)
Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
Output Wattage: 1-300W
Resistance Range: 0.05-1.5ohm for TC modes
Resistance Range: 0.1-3.5ohm for VW mode
Temperature Range: 100-315°C/200-600°F (TC modes)
Maximum Charging Current: 1.5A
Maximum Output Current: 50A
Reuleaux RX300-Carbon Fibre comes with
1pc Reuleaux RX300-Carbon Fiber(no cells)
1pc QC USB Cable
1pc Warning Card
1pc User Manual
1. 300W Maximum Output with Four 18650 Cells: Powered by four replaceable 18650 cells, the maximum output can reach 300W, providing you with a huge amount of vapor.
2. Brand-new Interface with Separate Battery Bars: The user-friendly interface with 0.96inch OLED screen presents all parameters clearly. And the battery status can be vividly displayed through the four separate bars.
3. Flip-open Battery Cover for Easy Exchange: The unique design of battery cover enables you to replace the cells with great ease.
4. Dual Circuit Protection & Reverse Polarity Protection: Reverse polarity protection is effectively achieved by the application of special battery anti reverse circuit in the circuit board. And the equipped dual circuit protection systems make the RX300 much safe and reliable.
5. Changeable Stickers for Decoration: Two editions are available, you can change the colourful sticker and decorate the device to your preference.
6. Up-gradable Firmware with Preheat Function: With an up-gradable firmware, custom logo and preheat function are available.
7. Innovative RC Adaptor: The newly introduced reverse charging adaptor serves as a power bank, providing power to electronic equipment when necessary.
The Setting of TCR Mode: In powered-off state, keep pressing the fire button and right regulatory button simultaneously, then you enter into the TCR set menu:
(1). Press the left or right regulatory button to choose among TCR M1, M2 AND M3;
(2). Press the fire button to confirm the mode you chosen;
(3). Press the left or right regulatory button to increase or decrease the parameter according to the TCR of coil;
(4). Keep pressing the fire button or leave the interface for about 10 seconds to confirm.
Following is the TCR value range for your reference:
|Material||TCR Value Range|
Note: 1. The TCR value in the sheet 10⁵ multiplied of the actual TCR.
2. The TCR value range is 1-1000.
3 Months for Vape Mods. Vape Tanks & Accessories are DOA(Dead On Arrival), please contact us within 72 hours of delivery.